How to Replace a Hinged Shower Door With Attached Fixed Glass

Fulcrum shower door--Or a hinge shower door attached to a fixed glass--The look of the shower can be updated to create a modern design for your bathroom.However, over time, your shower door may get dirty due to the accumulation of soap slag and sediment, which may reduce the appearance of your bathroom.Changing the door is not complicated, it is an easy way to keep the bathroom looking the best.Loosen the screw with a screwdriver and remove the pivot cover at the top of the pivot jamb.Loosen the screw with a screwdriver and remove the upper pivot mechanism.Lift the shower door directly up and take it out of the frame.The lower pivot pin should fall off when you remove the door.Repeat the process of removing the connected glass panel.By screwing the new up and down pivot clamps in place, install them on the wall post and the threshold.Guide the shower door into the frame, push it up into the top pivot clip, then lower it into the lower pivot clip.Repeat the process of installing the connecting glass.Stick the seal or sweep to the bottom of the door.Place the end cap on the top pivot fixture.